All-concrete floating Heavy Duty Pontoons are used in yacht harbours where the permitted wave height does not exceed 0,5 m. Stable Heavy Duty Pontoons with high load-bearing capacity can be also used as a breakwater, overpass bridges or landing stages. Pontoons are connected by flexible rubber joints and anchored with chains and concrete anchoring. Floats are manufactured or reinforced concrete and have an expanded polystyrene core. Standard float modules are 12 m long, 2,4 m wide and with 0,6 m freeboard. Floats can be fitted with mooring buoys or mooring fingers. Wood decking, mooring rings, fenders, service channels for electricity and water supply are available as auxiliaries.
Technical data of Heavy Duty Pontoons:
|
Item code |
TM 0430 |
| Bearing capacity (kN/m2) | 6,5 |
| Freeboard (m) | 0,6 |
| Dimensions of the concrete float P x L x K (m) | 12 x 2,4 x 1,05 |
| Weight (kg) | 12 000 |
| Area of use | Yacht harbours |
| Allowance wave height (m) | 0,5 |
| Allowance flow velocity (m/sek) | 1 |
| Allowance icing | No ice movement allowed |
| Dimensions of the access bridge (m) | 1,2 x 6 |
| Abutment | Concrete abutment |
|
Anchoring chain (mm) |
20 |
| Anchorage | Concrete anchor 2000kg +500kg balans weight |
| Dimensions of boats |
Mooring buoys or mooring fingers |
| Boat fastening | Yachts...15m |
| Manus | Suurus |
|---|---|
| Heavy Duty Pontoons.pdf | 250.78 KB |
Tule 21, 76505, Saue, Harjumaa, Estonia
Tel. (+372) 53 044 000
Fax (+372) 6 560 520
